|
CUSTOM
MAPPING
Having
a custom map built for your fuel-injected motorcycle
is the only way to optimize the bike's
performance. Adding upgrades to your bike such
as performance exhaust or high-flow air filters will
not give your bike more power without a re-map.
Most often, the bike will have less power than it
did stock! The reason is that the performance
upgrades do exactly what they should. That is:
get more air into the engine. But, the
computer is still only supplying the pre-programmed
amount of fuel, so, the bike runs lean and loses
horsepower. The dyno session allows us to
correct the fuel curve for a perfect air/fuel ratio
at every throttle position and RPM. We can
(and have) map any fuel-injected motorcycle with a
power commander: V-Twins, Sport Bikes, Drag Racers,
Road Racers, Nitrous Bikes & Turbo Bikes.
DYNO
RATES
|
Custom map on any fuel-injected bike |
$250.00 |
|
100% throttle only map |
$150.00 |
|
Nitrous map |
$150.00 |
|
HP, Torque, Air/Fuel pull |
$ 50.00 |
DYNO
RENTAL*
|
First Hour |
$150.00 |
|
Each Additional Hour |
$ 75.00 |
|
*2
hour minimum on Dyno Rentals. |
PRE-DYNO
NOTES
Make
sure your bike is ready for the dyno session.
The bike should have:
-
FUEL
-
A full tank of the fuel you will be running.
Different fuels require different maps. So
be sure we don't build your map on a fuel you
won't be using;
-
OIL
- It is your responsibility to make sure the
motorcycle has oil;
-
CHAIN
- Make sure the chain is lubed and adjusted;
-
CLUTCH PLATES
- Make sure the clutch plates are fresh;
-
REAR TIRE
- Make sure the rear tire is in good condition.
|
